TI's flyback controller standby power requirements for 10~65W AC adapters

TI，近日宣布该行业的第一个反激变换器控制器超过能源之星5的备用电源10 - 65 w AC / DC适配器，该适配器结合了使用TI的获奖WEBENCH 在线设计工具，和LM5023反激变换器控制器来简化并加速高压直流/直流设计。主要应用于笔记本电脑、电机控制、智能电表,许多独立的和其他高性能的应用程序。

TI's new LM5023 isolated quasi-resonant pulse-width modulation (PWM) controller with integrated 700-mA driver offers high efficiency at up to 90 percent, low EMI and less than 10-mW of standby power. The LM5023 provides 1-percent accurate output voltage regulation, eliminating the need for cable compensation. When coupled with the highly accurate LMV431 shunt reference, it provides a competitively priced, 1-percent accurate flyback controller system.

Key features and benefits of the LM5023:

One-percent voltage output regulation over line, load and temperature eliminates the need for cable compensation.

Exceeds Energy Star 5 and European Commission 5-Star requirements for stand-by power (greater than 30 mW): Operates at low-power skip mode for ultra-low stand-by power, or less than 10 mW at 230 Vac. This minimizes energy-wasting vampire effect of AC/DC power supplies.

Quasi-resonant operation improves efficiency while lowering EMI emission versus fixed frequency schemes.

Integrated 700-mA gate driver drives large FETs for higher power outputs without additional components.

Hiccup-mode overload protection reduces the stress on power components during overload conditions, increasing system reliability.

Critical conduction mode results in higher efficiencies, reducing switching losses through lower EMI and the use of a less expensive rectifier diode.

High-efficiency adapter power

Adapter power products from TI, including the LM5023, UCC28710, UCC28710 and UCC24610 primary and secondary PWM controllers, provide reliable, efficient, low-cost power solutions for a wide range of AC/DC charger and adapter applications. Innovative, high-efficiency power management controllers reduce both energy consumption and solution size. Universal charge controllers help designers minimize environmental impact and reduce charging times with standards compliance. With or without wires, TI solutions provide best-in-class no load power performance and highest average system efficiency.

Availability and pricing

Samples can be requested today and production quantities of the LM5023 are expected to be available in the second quarter.  Offered in an 8-pin MSOP package, the LM5023 is priced at US$0.38 in quantities of 1,000.

The LM5023EVM notebook adapter evaluation module is priced at US$49.99 in 1,000-unit quantities and is expected to be available through TI's eStore this quarter. TI also offers a 3.5-W multi-output adapter reference design, that generates an isolated 3.3-V output at 200 mA from an input of 100 V to 250 V.